Using Your EXI2926 Intercom
Paging from the base to handset
1)Press intercom on the base.
The handset beeps. (If no answer, press intercom on the base again to disconnect.)
2)Press ▲up/int’com on the handset.Speak into the mouthpiece to answer the page.
3)To turn off the intercom, press intercom on the base or ▲up/int’com on the handset.
Paging from the handset to base
1)Press ▲up/int’com on the handset.
(If no answer, press ▲up/int’com on the handset to disconnect.)
2)At the base, press intercom. Speak into the base microphone to answer the page.
3)To turn off the intercom, press intercom at the base or ▲up/int’com on the handset.
Transferring Calls
1) To transfer a call from the base or the handset, press hold then intercom.
2) Answer by pressing intercom.
On the base the status LED lights and line 1 LED turns red. The following screen appears.
You may then announce the call with the intercom.
3) To speak to the caller, press line 1 or line 2.
If no one is available to take the call, return to the caller by pressing line 1 or line 2 to take a message or complete the call.
Intercom (Hold) Line 1
Using the Speakerphone
You may use the phone as a speakerphone to answer calls by pressing the line 1 or line 2 button on the base. To hang up, press line 1 or line 2 again.
The base microphone is located under the phone. Position yourself as near to the base as possible and speak clearly.
If the handset is on the base, you may use either the base keypad or memory dialing to place a call.
[ 20 ] 2 - L I N E F E AT U R E S
