Setting Caller ID Options
There are three Caller ID setup options available; they are AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code. See page 12 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing line 1.
If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. Or if the handset is not on the base, press any key to answer the call. If the phone rings when AutoTalk is off, you must press line 1 to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting number. You must subscribe to CIDCW from your phone company in order to use this feature.
To change your Caller ID options:
1) When the phone is in the standby mode, press and hold cid/hold until the Caller ID setting screen appears.
2) Press * /t/tone or # /s to select ”Line1” or ”Line2” .
3) Press ▲/up/intcm or ▼/down/conf. . The following screen appears.
4) Press ▲/up/intcm or ▼/down/conf. to move the cursor to the selection that you would like to change. Press the select/channel key to toggle between ”On”and ”Off”.
5)Af ter you have made your selections, press cid/hold and return the handset to the base.
GETTING STARTED
G E T T I N G S TA R T E D [ 11 ]
