C. Connect the base unit

1) Connect the AC adapter to the DC IN 9V jack and a standard 120V AC wall outlet.

2) Set the base on a desk or tabletop, and place the handset in the base unit as shown.

3) Raise the antenna to a vertical position.

4) Make sure the status LED lights. If the LED does not light,

check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

• Use only the supplied AD-313 AC adapter. Do not use any other AC adapter. note • Connect the AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

!

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

GETTING STARTED

G E T T I N G S TA R T E D [ 9 ]

Page 13
Image 13
Uniden TRU3466 owner manual Connect the base unit