Uniden TRU3466 owner manual Making and Receiving Calls, Terminology, Basic 2-line operation

Making and Receiving Calls

Basic 2-line operation

Handset On Base Handset Off Base Base Only

To answer	Pick up the handset (When		Press any key (When the		Press line 1 or line 2.
	the AutoTalk is set to on)		AutoTalk is set to on) or
a call
	or pick up the handset and		press line1.
	press line1.
	1)	Pick up the handset.	1)	Press line1.	1) Press line 1.
To make	2)	Press line1.	2)	Listen for the dial tone.	2) Listen for the dial tone.
a call	3)	Listen for the dial tone.	3)	Dial the number.	3) Dial the number.
	4)	Dial the number.
To hang up	Press line1, or return the handset to the base				Press line 1.
	(Auto Standby).

For clarity, the instructions in this owner´s manual designates line 1 unless the procedure requires using line 2. The same instructions apply to line 2.

Terminology

Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation.

•Standby Mode - The handset is not in use, off the base and line 1 or line 2 has not been pressed. A dial tone is not present.

•Talk Mode - The handset is off the base and line 1 or line 2 has been pressed enabling a dial tone.

note

•You must have a 2-line subscription from your phone company to use the 2-line features.

•Refer to page 11 ”Setting Caller ID Options” to turn on the AutoTalk feature if desired.

B A S I C S [ 13 ]

BASICS