Uniden TRU3466 owner manual Entering Your Area Code, Press select/channel

note

If your calling area requires 10-digit dialing, do not program this option.

Entering Your Area Code

If you enter your 3-digit area code number in the ”Area Code” option, your local area code does not appear in the Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For calls received from outside your local area code, you will see a full 10-digit number.

1) When the phone is in the standby mode, press and hold cid/hold until the Caller ID setting screen appears.

2) Press * /t/tone or # /s to select ”Line1” or ”Line2” .

3) Press ▲/up/intcm to select ” Area Code” .

4) Press select/channel.

5) Use the dial buttons (0 to 9 ) to enter the 3-digit area code.

6)Press select/channel. A tone sounds and the displayed area code is entered.

7)Press cid/hold to complete the setting. Or return the handset to the base unit. The handset returns to standby mode.

When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the delete/volume and number keypad to enter

note the new area code. Then press select/channel. To complete the setting, press cid/hold or return the handset to the base unit.

[ 12 ] G E T T I N G S TA R T E D