Long Distance calls and Area Code setting/Cancellation

Press 1 while the incoming call information is displayed will set or cancel a long distance call. Pressing 3 will set or cancel an area code setting.

Storing a Caller ID number in a memory location

1) Press cid/hold. The Caller ID summary screen shows the number of new callers and total number of calls.

2) Use * /t/tone or # /s to select ”Line1” or ”Line2” Caller ID.

3) Press /up/intcm or /down/conf. to f ind the name/number that you would like to store.

4) Press memory to store the selected message. The following screen appears:

5)The ”Select Location” screen appears. Use the /up/intcm and /down/conf. to select a blank memory location where you would like to store the number.

(If you want to replace an existing number with the Caller ID number, skip to step 7).

6)Press select/channel. A conf irmation tone sounds. The number is programmed.

7)If you choose to replace an existing number with the

Caller ID number, press select/channel.

The following screen appears:

8)Use the /up/intcm to move the cursor to ”Yes”. Press select/channel. A conf irmation tone sounds. The number is programmed.

note

•You cannot make a call from the Caller ID list if your TRU3466 is connected to a private branch exchange (PBX).

•If you select ”No”, then the Caller ID screen returns.

CALLER ID FEATURES

C A L L E R I D F E AT U R E S [ 37 ]

Page 41
Image 41
Uniden TRU3466 Long Distance calls and Area Code setting/Cancellation, Storing a Caller ID number in a memory location