Uniden TRU3466 owner manual Making Calls with Memory Dialing, Display a programmed number

note

•If you press select/channel before line 1 or line 2, you can confirm the name and the number stored in the selected memory location.

•To exit the memory function without dialing press memory. The handset returns to standby.

•Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby.

Making Calls with Memory Dialing

Follow the steps below to dial a number using a programmed memory location:

With the handset

1) Press memory.

The handset displays your programmed memory locations.

2) Press ▲/up/intcm and ▼/down/conf. or enter a number (01-30) to select the memory

location you would like to dial.

3) Press line1. The number is dialed.

Display a programmed number

Use # /s and * /t/tone to toggle between the names display and the numbers display.

note	When the stored phone number has 14 or more digits, ” \” is
	displayed next to the 12th digit. Press # /s to see the extra
	digits and * /t/tone to return.

With the base 1) Press line 1.

2) Press memory. Enter the memory location number ( 0-9), to dial the number.

[ 30 ] M E M O RY F E AT U R E S