Unitech PA950 manual Select a modem list, tap Bluetooth Next, Tap Finish, 21-191

1.Make sure that the Bluetooth phone is turned on, that your device's and the phone's Bluetooth radios are turned on, and that your device and the phone are within 10 meters (30 feet) of one another.

2.If you have not already done so, create a Bluetooth phone connec- tion by following steps 3 through 16. Otherwise, skip to step 17.

3.Tap > Settings > Connections tab.

4.Tap Connections > Add a new modem connection.

5.Enter a name for the connection.

6.In the Select a modem list, tap Bluetooth > Next.

7.Make sure that the phone is discoverable. Some phones may also need to be pairable in order to accept a bonding request. For more information, see your phone documentation.

8.If the phone appears in the My Connections list, skip to step 14. If not, tap New and follow the remaining steps.

9.In the list, tap the phone and then Next.

10.In PIN, enter a PIN of between 1 and 16 characters, and tap Next.

11.Enter the same PIN on the phone.

12.If you want, in Name, edit the name of the phone.

13.Tap Finish.

14.In the My Connections list, tap the phone, and then Next.

15.Enter the phone number to dial for this connection and tap Next.

16.In User name, Password, and Domain, enter the logon information for this connection and tap Finish.

17.Start using the program that uses the Bluetooth phone connection; for example Inbox to send and receive e-mail, or Internet Explorer to browse the Web.

See Also: Turning On and Off Bluetooth

Making Your Device Discoverable

Beaming Information With Bluetooth

Receiving a Bluetooth Beam

21-191