Unitech PA950 manual Tap Settings Connections tab Beam, Tap Settings System tab Clock

Beam

Tap > Settings > Connections tab > Beam.

By default your device detects incoming infrared (IR) and Bluetooth beams and prompts you to accept them. If you do not want your device to detect or receive beams, clear the Receive all incoming beams check box.

If someone attempts to send you an IR beam from an older device, you may not be prompted to accept it. In this case, before the beam is sent from the other device, tap Receive an infrared beam at the bottom of the Beam screen.

See Also: Beaming Information

Receiving a Bluetooth Beam

Clock

Tap > Settings > System tab > Clock.

If you visit a particular time zone often, select it as your Visiting time zone on the Time tab so that you can quickly see the correct date and time.

You can use your device as a travel alarm clock by setting a wake-up alarm on the Alarms tab. Tap the alarm icon to select the type of alarm you want.

To change the way the date or time is displayed on your device, go to Regional Settings.

The clock is displayed on the navigation bar. Tap the clock to see today's date.

3-36