Connect to a PC

Connect to a PC via a cable or cradle

Connect to a PC via infrared

Connect to a PC via a cable or cradle

Connect your device and PC via a cable or cradle to start synchronization. The baud rate and/or cable type is set automatically. If you have problems connecting, try lowering the baud rate or selecting a different type of cable, such as USB.

1.Tap > ActiveSync > Tools > Options > PC tab.

2.Tap Options.

3.Select Enable PC sync using this connection, and select a baud rate or cable type. The next time your device and PC are connected, this new setting will be used.

4.To disconnect, remove your device from the cradle or detach it from the cable.

See Also: Connect to a PC via infrared

Synchronize remotely with a PC

Connect to a PC via infrared

1.Follow the instructions in ActiveSync Help on the PC for setting up your PC.

2.Line up the infrared (IR) ports according to the instructions in your owner's manual so that they are unobstructed and within a close range.

4-45

Page 45
Image 45
Unitech PA950 manual Connect to a PC via a cable or cradle, Connect to a PC via infrared