Modifying Your Vanguard 3400 Series
Caution
When handling any components or cards, use ESD protection.
Removing the Motherboard |
| |
1 | Power down the unit and remove the cables |
|
| and power cord. |
|
2 | Remove the two screws on either side of the |
|
| motherboard rear panel. |
|
3 | Pull motherboard out of chassis by grabbing | Installing the Motherboard |
| the bottom edge of rear panel and carefully | |
| sliding it out of chassis. | 1 Carefully slide the motherboard into the card guides within the |
4 | Place the motherboard on a clean flat surface. | chassis opening, then push the motherboard into the enclosure. |
2Install and tighten screws on both sides of the rear panel. Be sure the screws are snug.
3Reconnect the cables and power cord and power up the unit.
Figure 3-7. Vanguard 3400 Series Motherboard Removal and Replace- ment
Installation and Replacement |
