Vanguard Managed Solutions 3400 Series Installing and Removing the Encryption PCI Mezzanine Card

Modifying Your Vanguard 3400 Series

Installing and Removing the Encryption PCI Mezzanine Card

Introduction

Adding or Removing Encryption PCI Mezzanine Card

The Encryption PCI Mezzanine card is an option and may have been installed on the motherboard at the factory. If not, you can install or replace the card.

This section explains how to:

• Add and remove Encryption PCI Mezzanine Card.

For instructions for removing the motherboard, refer to the “Accessing the Motherboard” section on page 3-13.

Figure 3-10shows how to add or remove an Encryption PCI Mezzanine Card. Refer to Figure 3-8for the location of the Encryption PCI Mezzanine Card.

For instructions for removing the motherboard, refer to the “Accessing the Motherboard” section on page 3-13.

Caution

Some components used in the 3400 Series are sensitive to static electric discharges; static electric discharges can cause damage to internal components. Use proper handling and grounding precautions whenever handling cards and components.

Mise en Garde

Certains composants du 3400 Series sont sensibles aux décharges électrostatiques qui peuvent les endommager. Prenez les dispositions et précautions de mise à la terre nécessaires lors de la manipulation de cartes et de composants.

Vorsicht

Einige im 3400 Series verwendeten Komponenten sollten keinen elektrostatischen Entladungen ausgesetzt werden, durch die interne Bauteile beschädigt werden können. Wenden Sie die entsprechenden Maßnahmen zur Erdung und zum Schutz vor statischen Ladungen bei der Handhabung von Karten und Komponenten an.

Note

The location of the Encryption PCI Mezzanine Card is indicated on the motherboard as shown in Figure 3-8.

Installation and Replacement 3-17