Vanguard Managed Solutions 3400 Series How to Order, Connections, Service Facility Interface

FCC Part 68 and Telephone Company Procedures and Requirements for DSU and T1 Interfaces

FCC Part 68 and Telephone Company Procedures and Requirements for DSU and T1 Interfaces

Before You Begin Before a Vanguard 3400 Series can be connected to the network, you must do the following:

•Provide the local telephone company with the equipment’s registration num- ber.

•Order the proper connections

How to Order	To order the proper connections, provide the telephone company with the following
Connections	information:
	•	Interface type
	• Required USOC jack connector number
	•	Service code
	•	Facility interface codes
		Interface Type	USOC Jack	Service	Facility Interface
			Connector	Code	Code
	56-kbps digital interface		RJ48S	6.0F	04DU5-56
	Fractional T1 Interface		RJ48C	6.0F	04DU9-BN
					04DU9-2SN

Troubleshooting If any of your equipment is not operating correctly, immediately remove it from the Your Connection telephone line before damaging the network. If the telephone company is aware of the problem, they may temporarily disconnect your service. Whenever possible, the

telephone company notifies you in advance of the disconnection.

If advance notice is not feasible, you are notified as soon as possible. Once notified, you can correct the problem. If necessary, it is your right to file a complaint with the FCC.

B-2