|
| Installing Software | |
|
|
|
|
Step | Action | Response (continued) |
|
|
|
|
|
2 | Select TFTP. | If your node is ready for TFTP |
|
|
| download, the following message |
|
|
| appears: |
|
|
| Optional Software Images are |
|
|
| DISABLED. The node is ready for |
|
|
| TFTP transfer. |
|
|
| The prompt “Network Load an |
|
|
| Image? (y/n):” appears. You can |
|
|
| then proceed to step 3. |
|
|
| If your node is NOT ready for |
|
|
| TFTP download, the following |
|
|
| message appears: |
|
|
| Optional software Images must be |
|
|
| DISABLED. |
|
|
| A node boot is required. |
|
|
| Disable and Boot? (y/n): |
|
|
| Respond to the question by |
|
|
| pressing the Y key. |
|
|
| After this, the node with |
|
|
| automatically reboot, and you must |
|
|
| return to step 1. |
|
|
|
|
|
3 | Enter Y to begin the download of | The prompt Enter File Name: |
|
| either base software or an image | appears. |
|
| option. |
|
|
| Enter N, and proceed to step 7, if |
|
|
| you are enabling an option image. |
|
|
|
|
|
|
4 | Enter the name of the file you wish | The IP address: prompt appears. |
|
| to load on your 650. |
|
|
|
|
|
|
5 | Enter the IP address of the TFTP | The prompt Ready to initiate TFTP |
|
| server. | transfer (y/n): appears. |
|
|
|
|
|
6 | Enter Y to begin transfer of the | The 650 automatically reboots |
|
| software. | when the base software download |
|
|
| is complete. A reboot is not needed |
|
|
| if you are loading an option image. |
|
|
| Then, return to step 1 to either load |
|
|
| an option image or enable an |
|
|
| image that was previously loaded. |
|
|
|
|
|
7 | Enter Y, when prompted with | The node automatically reboots, |
|
| Enable Optional Software Images? | and the new option image is |
|
| (y/n): to enable your option image. | enabled. |
|
|
|
|
|
|
|
|
|
Installing and Coldloading 650 Series Software |
