Vanguard Managed Solutions 650 About This Manual, Overview, Introduction, Audience, Level

		About This Manual
Overview
Introduction
	This manual describes features, hardware, specifications, and applications for the
	Vanguard 650 Series of products. This revision of the Manual is specific to the
	manual 651/653 and 652/654 models of the product.
	For information on operating system software and configuration, see the Vanguard
	Documentation Kit.
Audience
	This manual is intended for operators of Vanguard 650 Series products.
Software Revision
	The 650 Series runs Release 5.0 and greater of the Network Access Series operating
Level	software. For software releases higher than 5.0, refer to the Software Release Notice
	for the software release to determine if it is applicable to the 650 Series.
Chapter
	The following table describes the contents of this manual.
Descriptions
	This section...	Describes...
	Chapter 1	the 650 Series of products, the shipment contents,
		hardware installation and cabling, and shows the
		power-up sequence for the 650 Series.
	Chapter 2	accessing and navigating the control port of the 650
		Series to verify or change parameters, to check
		statistics, or to boot the node.
	Chapter 3	updating your operating software, and saving or
		restoring a supplied configuration file.
	Appendix A	the physical and environmental specifications and
		power requirements for the 650 Series.
	Appendix B	software license and regulatory information.

iii