Vanguard Managed Solutions 650 installation manual Vanguide Terminal, Overview, How To Use, Action

Installing Software

Vanguide Terminal

Overview	The Vanguide Terminal (Figure 3-9)is a terminal emulator for communicating with
	Vanguard devices using the CTP port. It supports basic ANSI/VT100 terminal
	emulations, ignoring all escape characters for these sequences.
How To Use
	Follow these steps to connect to a 650 Series CTP using the Vanguide Terminal
Vanguide Terminal	utility.
	Step		Action
	1	Cable your 650 Series to a personal computer running the Vanguide
		application, as shown in “Cabling the 650 Series” on page 4.
	2	From the Windows Program Manager, open the Vanguide Application
		Manager icon.
	3	Make sure your Communications port is set correctly.
	4	Choose Vanguide Terminal. The Vanguide Terminal window appears
		(Figure 3-9).
	5	Press the Return key until the OK prompt appears. This means your PC is
		connected to the 650 Series. If no OK prompt appears, check the physical
		connection between the 650 Series and your personal computer.
	6	Enter ATDS0 and press Return. The Control Terminal Port screen
		appears (Figure 3-9).
		Figure 3-9. Example of Vanguide Terminal Window

3-16 Installing and Coldloading 650 Series Software