Selecting a Predesigned Configuration
Saving and Restoring Configurations Using TFTP
Introduction | TFTP can also be used to transfer CMEMs from a server to the 650 Series node. |
Before You Begin Ensure that the configuration you wish to download resides on the TFTP server, and obtain the filename. Also obtain the IP address of the server. PING the TFTP server to verify that you have IP connectivity between the TFTP server and the 650 node.
Saving | This table describes how to save a configuration using TFTP. | ||
Configurations |
|
|
|
Using TFTP |
|
|
|
|
|
|
|
| Step | Action | Result |
|
|
|
|
| 1 | Access the control port, and from | The Configuration Save/Restore |
|
| the Main menu, select | menu appears. |
|
| Configuration Save/Restore. |
|
|
|
|
|
| 2 | Select TFTP Save Configuration | The Enter file name: prompt |
|
| from the Configuration Save/ | appears. |
|
| Restore menu. |
|
|
|
|
|
| 3 | Enter the name of the | The Enter IP address: prompt |
|
| configuration file to which you | appears. |
|
| wish to save. The default file name |
|
|
| is NODENAME.MEM. |
|
|
|
|
|
| 4 | Enter the IP address of the TFTP | The Ready to initiate TFTP |
|
| server. | transfer?: prompt appears. |
|
|
|
|
| 5 | Enter Y to start the transfer. | The transfer begins. If it is |
|
|
| successful, the message Operation |
|
|
| Successful. appears. |
|
|
| If the transfer fails, the message |
|
|
| Local Transfer Failure. appears. You |
|
|
| can then retry the operation. |
|
|
|
|
Installing and Coldloading 650 Series Software |