Configuration
General Configuration
Start Mode
Controls the type of user interface and location of content that the IPR will display at startup.
Use this option to set the unit to decode one channel and operate in | |
| full screen mode at start up. You also need to enter a |
| URL for the channel as in the following example. If you use a public |
| URL, be sure it is accurate and has not changed. See Table 1 on |
| page 7 for detailed |
| http://<ip_address>:<port_number>/<channel_name> |
|
|
Portal Server | Use this option if the installation includes an EtherneTV Portal Server |
| and enter the Portal Server URL. |
|
|
Local | Use this option if the installation does not include an EtherneTV |
| Portal Server. Check Default to use the default pages. Uncheck |
| Default and enter a Custom Local Path to use your own pages. See |
| Local Mode Configuration on page 23 for more about Local Mode. |
| Note that the Custom Local Path is relative to FTP root rather than |
| absolute. For example, the following relative path is valid: |
| Valid path: sample\local.asp |
| Invalid path: c:\sample\local.asp |
|
|
Local-Mode URLs
These fields are used to populate the program list on the IPR when Start mode is set to Local. See Local Mode Configuration on page 23 for a discussion of how to add channels.
Ch#
Channel number that will display on the IPR.
VBrick WM IP Receiver Admin Guide | 11 |
