VBrick Systems v4.1 manual Stream Type URL Syntax

Getting Started

Local-Fullscreen	The WM IPR can operate in a fullscreen mode. One channel is
	displayed and this stream uses the entire screen of the attached
	monitor. Table 1 below shows the URL syntax for Local-Fullscreen.
Portal Server	When installed with an ETV Portal Server, the features and options of
	the VBrick WM IPR are controlled through the VBrick Portal Server.
	See the Portal Server Admin Guide for more information.
Local	In Local mode, the IPR will retrieve and render the user interface web
	page from the configured local path. This is typically located on the
	IPR's file system. The program guide on the viewer web page will
	include the streams defined for Local mode on the IWS configuration
	page. See Local Mode Configuration on page 23 for more
	information.

3.Press Apply to exit IWS and open the IPR interface in the selected mode

Table 1. Local-Fullscreen URL Syntax

Stream Type	URL Syntax
Multicast WM	Multicast IP address of VBrick WM Appliance. On the WM
	Appliance, go to Configuration: Encoder > Multicast and use the
	Multicast URL, for example:
	http://<ip_address>/vbs1multi.nsc
Unicast WM HTTP	HTTP URL of VBrick WM Appliance. On the WM Appliance, go to
(Live)	Configuration: Encoder > Server and use the HTTP URL, for
	example: http://<ip_address>:8080/vbrickvideo1/group1
	If your WM Appliance is configured to serve multiple bit rates (MBR)
	you must configure the WM IPR with a group-specific URL, for
	example:
	http://<ip_address>:8080/vbrickvideo1/group1
Unicast or HTTP	Depends on VOD server. The complete path including HTTP URL
(VOD)	and publishing point, for example:
	http://<ip_address>/VBP/MYWMVideos/myVideo.wmv

VBrick WM IP Receiver Admin Guide 7