Chapter 6

Using the IR Remote

VBrick appliances support features provided through an optional hand held IR (infrared) remote control. The IR remote enables users to access VBrick appliance functions and control functions with simple program commands. Front Panel Edit options are model dependent. For example, a dual encoder will allow editing of two destination IP Addresses and ports. The IR remote control has limited functionality. If enabled, you can use the IR remote control to set the IP address and perform certain other functions. Use the * button for the decimal point and the Left and Right buttons to erase entries. Aim the remote at the sensor on the front panel IR Port of the encoder. To enable or disable the IR remote, go to Configuration: System > General > IR Enable. The remote is enabled by default.

Topics in this chapter

Front Panel Edit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

MPEG-2/MPEG-4 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

WM Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Front Panel Edit

The Front Panel is the LCD display on the front of the unit. Certain keys (see below) on the IR remote control can be used to set configuration parameters. Front Panel Edit can be invoked by pressing Local Edit key on the remote control. The default password is 23646 (which is admin, numerically). Press the Select key to enter. IR remote control of Local Edit

is set in IWS under Configuration: System > General > IR Enable. Entering the operator

password (default = operator) will not allow changing the IP Address, Subnet Mask, or Gateway IP. Entering the administrator password (default = admin) allows changing all of the configurable parameters.

Table 7. Front Panel Edit Keys

Key

Description

 

 

Up

Terminate string from cursor

 

 

#

Terminate string from cursor.

 

 

*

Period (.) used in IP addresses.

 

 

Down

Backspace.

 

 

Left

Shift cursor to the left.

 

 

Right

Shift cursor to the right.

 

 

Select

Change current setting and continue to next setting.

 

 

Next Page

Don't change current setting and continue to next setting.

 

 

Numbers

Numbers for editing.

 

 

VBrick Appliance Getting Started Guide

41

Page 49
Image 49
VBrick Systems VB4000, VB6000, VB5000 manual Front Panel Edit, Key Description