VBrick Systems VB6000, VB4000, VB5000 manual MPEG-2/MPEG-4 Remote Control

	Using the IR Remote
Dialog Window	Description
Gateway	This screen will display the current Gateway of the VBrick. If the
	current setting does not need to be modified press the select key.
	Otherwise enter in the correct value followed by the select key. If the
	Box IP, Subnet Mask or Gateway IP has been modified and there are
	no errors reported on the front panel, the VBrick will now reboot.
Slot x Dest IP	This screen will display the current Destination IP Address for Slot x
	of the VBrick. If the current setting does not need to be modified press
	the select key. Otherwise enter in the correct value followed by the
	select key.
Slot x Dest Port	This screen will display the current Destination Port for Slot x of the
	VBrick. If the current setting does not need to be modified press the
	select key. Otherwise enter in the correct value followed by the select
	key. If the Destination IP or Destination Port has been modified and
	there are no errors reported on the front panel, the VBrick is now
	using the new settings.
Slot x Rcv IP Addr	MPEG appliances only. This screen will display the current Receive IP
Screen	Address for slot x of the VBrick. If the current setting does not need
	to be modified press the select key. Otherwise enter in the correct
	value followed by the select key.
Slot x Rcv Port	MPEG appliances only. This screen will display the current Receive Port
Screen	for slot x of the VBrick. If the current setting does not need to be
	modified press the select key. Otherwise enter in the correct value
	followed by the select key. If the Receive IP or Receive Port has been
	modified and there are no errors reported on the front panel, the
	VBrick is now using the new settings.
Show BoxIP	This will allow the enabling or disabling of the scrolling IP Address on
	the Front Panel Display of the VBrick appliance for security (6 = no, 9
	= yes).

MPEG-2/MPEG-4 Remote Control

VBrick appliances support features provided through an optional hand held IR (infrared) remote control. The IR remote enables users to access VBrick appliance functions and control functions with simple program commands. Front Panel Edit options are model dependent. For example, a dual encoder will allow editing of two destination IP Addresses and ports. The IR remote control has limited functionality. If enabled, you can use the IR remote control to set the IP address and perform certain other functions. Use the * button for the decimal point and the Left and Right buttons to erase entries. Aim the remote at the sensor on the front panel IR Port of the encoder. To enable or disable the IR remote, go to Configuration: System > General > IR Enable. The remote is enabled by default.

VBrick Appliance Getting Started Guide 43