Pairing your cell phone and Bluetooth® remote box
1.Press the VOL+ on the Bluetooth® remote box. The LED on the remote box will start flashing fast, the pairing mode is activated.
z Refer to cell phone’s user manual to learn who to put your cell phone into pairing mode.
z The default PIN is 0000
2.After pairing, the LED on the car unit will flash every 3 or 4 seconds to indicate that the unit is in call waiting mode for receiving and mak- ing calls.
Answering an incoming call
1.The ring tone will sound from the car radio speaker.
2.Short press the TALK button to answer the call.
3.Now you can talk hands free via the micro- phone of the Bluetooth® car unit and listen from the car audio speaker instead of your cellular phone.
During talking, the LED on the Bluetooth® car unit light continuously.
4.You can adjust the volume by means of the VOL+ and VOL- button on the car radio.
5.To receive a call directly on your cell phone, press the TALK button longer then 3 sec- onds.
Re-dialling last called number
1.In call waiting mode, press the TALK button twice, the last called number will be
Ending a call
1.Press the TALK button once and the Blue- tooth® car unit will return to the call waiting mode.
State of the LED on the Bluetooth® car unit
State | LED Status |
Pairing | flashes fast |
Not connected | Off |
Connected | Lights every 4 sec. for |
| 2 sec. |
Ringing | Lights continuously |
Talking | Lights continuously |
Note:
The Bluetooth® compatibility depends on the solution integrated into the Bluetooth® car unit and the cell phone to be paired with. The firmware of the cell phone may vary from re- gion to region and manufacturer to manufac- turer.
20
