Selecting a Use the following guidelines to select a location for the MX800 Series terminal. Location 1 Select a location for the terminal that offers adequate ventilation and

protection and is convenient for the user and merchant.

WARNING

The MX800 Series terminal is designed for indoor use only.

2Place the MX800 Series terminal on a flat surface, such as a table or countertop, or mount it on a mounting stand supplied by VeriFone. Avoid areas with:

•Excessive heat or dust

•Oil or moisture

•Devices that cause excessive voltage fluctuations or electrical noise, such as air conditioners, fans, electric motors, neon signs, or high-frequency security devices

•Direct sunlight or objects that radiate heat

3Position the terminal conveniently in relation to power and ECR or LAN connections.

WARNING Do not use the MX800 Series terminal near water, including a bathtub, wash bowl, kitchen sink, or laundry tub. Do not use in a wet basement or near a swimming pool.

4Before connecting the terminal to the power pack, complete the installation by connecting all the cables (see Connecting the Device and Power Up with the Multiport Cable).

Stand Mount In most retail spaces, the terminal is positioned on a stand mount. To install the terminal on the stand mount:

1Install the stand mount on the countertop in the desired lane over an appropriate hole through which the wiring connections can be threaded.

2Thread all wiring connections through the center of the stand mount.

3Make all wiring connections.

4Attach the cable tie-down strap with the supplied screw.

5Align and seat the three pins on the top plate of the stand mount platform with the three key-hole slots on the bottom of the terminal (Figure 2).

MX800 SERIES INSTALLATION GUIDE

9