VeriFone MX800 Installing I/O, Modules, Figure 5 Removing the old I/O Module, Figure 4 Installing the Countertop Wedge

3Route the multiport cable through the races in the countertop wedge or through the races underneath the wedge.

Figure 4 Installing the Countertop Wedge

.

Installing I/O Use the following steps to install optional I/O modules:

Modules

NOTE

The retaining screws are captive, which means they do not actually separate from their seats, but only from the mounting hole.

1Loosen the module retaining screw on the bottom of the terminal (Figure 5) until the old module can slide out.

Figure 5 Removing the old I/O Module

12MX800 SERIES INSTALLATION GUIDE