6Slide the terminal down until the unit seats securely.

PIN Protection Measures
Figure 2 Aligning MX800 Series Terminal with the Typical Mounting Plate

The following techniques can be employed to provide for effective screening of the PIN-entry keypad during the PIN entry process. These methods would typically be used in combination, though in some cases a method might be used singly.

•Positioning of terminal on the check-stand in such a way as to make visual observation of the PIN-entry process infeasible. Examples include:

•Visual shields designed into the check-stand. The shields may be solely for shielding purposes, or may be part of the general check-stand design.

•Position the PED so that it is angled in such a way that PIN spying is difficult.

•Installing PED on an adjustable stand that allows consumers to swivel the terminal sideways and/or tilt it forwards/backwards to a position that makes visual observation of the PIN-entry process difficult.

•Positioning of in-store security cameras so that the PIN-entry keypad is not visible.

The following table describes the two preferred mounting methods and the recommended measure to protect from PIN capture in four observation corridors:

10MX800 SERIES INSTALLATION GUIDE