VeriFone MX800 Installing Countertop Wedge, Optional, Installing, Components, Table, Queue, Method, Cashier, On-Site, Cameras, Customers, Elsewhere, Customer In

InstallingOptionalComponents

Installing Countertop Wedge

Table 4	Mounting Methods and Protection Measures
Method		Cashier	Customer In	Customers	On-Site
			Queue	Elsewhere	Cameras
Countertop		Use signage	Install so that	No action	Do not install
without stand		behind the	customer is	needed	within view of
		PED	between PED and		cameras
			next in queue
Countertop		No action	Install so that	No action	Do not install
with stand		needed	customer is	needed	within view of
			between PED and		cameras
			next in queue

VeriFone also recommends instruction of the cardholder regarding safe PIN-entry. This can be done with a combination of:

•Signage on the PED

•Prompts on the display, possibly with a “click-through” screen

•Literature at the point of sale

•A logo for safe PIN-entry process

This section discusses the installation procedures for the optional components available for the MX800 Series terminal. Your terminal may already have some of these options, as modules can be installed at the factory or in the field.

The countertop wedge raises the rear section of the MX800 Series terminal by an angle of 10 degrees to facilitate use of the screen (Figure 3).

To install the countertop wedge

Figure 3 Countertop Wedge: Rear View of the MX800 Series Terminal

1Align the pins in the countertop wedge with the two key holes on the bottom of the MX800 Series terminal (Figure 4).

2Slide the countertop wedge firmly into position.

MX800 SERIES INSTALLATION GUIDE 11