VeriFone MX800 Multiport Cable, Figure 12 Sample Multiport Cable: Front and Rear

Multiport Cable The MX800 Series terminals use a multiport cable (Figure 12) to make most connections, including connections to:

•an ECR

•an Ethernet LAN

•a development/host PC

Figure 12 Sample Multiport Cable: Front and Rear

CAUTION

Improper installation or removal of the terminal connector may permanently damage the MX800 Series terminal.

The following precautions must be taken with multiport cables:

•Do not force the terminal connector into place.

•Always make sure that all of the pins are lined up in correct parallel fashion before applying light pressure to snap the terminal connector into place.

•Do not attempt to remove the terminal connector by pulling directly on the cable. Instead, firmly grasp the sides of the terminal connector with thumb and forefinger, then pull out at the same angle the connector on the terminal is facing.

•Disconnecting the power source during transaction processing may cause loss of transaction data.

16MX800 SERIES INSTALLATION GUIDE