4Remove any previously installed MSAM card by sliding the card from the MSAM cardholder.

Figure 8 Removing Installed MSAM Card

NOTE Before inserting the MSAM card, position it with the card’s gold contacts facing the smart card reader end of the terminal. The cardholder connector base has a set of contacts and a notch on one corner to ensure the MSAM card is positioned correctly. The MSAM card has a notch on one corner to ensure that it fits into the connector base in only one way. The MSAM compartment door will not close properly if the MSAM cards are installed incorrectly.

5Install an MSAM card by aligning the card and carefully sliding it within the guides on the cover until it is fully inserted.

Figure 9 Inserting the MSAM Card

14MX800 SERIES INSTALLATION GUIDE