Power Up with the Multiport Cable

This section describes how to connect the MX800 Series terminal to a power source using the multiport cable.

NOTE

If connected to an ECR, the MX800 Series terminal can receive power from the ECR.

WARNING

Do not plug the power pack into an outdoor outlet or operate the terminal outdoors.

1Make all other connections before connecting the power pack.

2Insert the multiport cable connector into the port on the back of the terminal (see Figure 15).

3Route the cable through the slots to the desired exit side.

4Insert the plug from the power pack into the +12V receptacle on the multiport cable.

5Plug the power pack into an indoor electrical power outlet (Figure 15).

Figure 15 Power Pack Connection

MX800 SERIES INSTALLATION GUIDE

19