Manuals / Brands / Computer Equipment / Credit Card Machine / VeriFone / Computer Equipment / Credit Card Machine

VeriFone MX800 Installing the, Trimplate, Connecting the Device, Figure 11 Installing the Trimplate, Figure 10 Reinstalling the Compartment Door and Screw

1 40

Download 40 pages, 2.76 Mb

6Reinstall the compartment cover and door screw.

Figure 10 Reinstalling the Compartment Door and Screw

Installing the The MX800 Series terminal can be fitted with interchangeable trimplates to Trimplate customize the appearance of the terminal. MX870 trimplate installation is

explained below. Trimplates for the MX860, MX850, and MX830 are snapped straight down and are not rocked into place.

1Insert the trimplate by lining up the three notches of the face plate into the unit.

2Firmly snap the top part of the trimplate to secure it.

Connecting the Device

Figure 11 Installing the Trimplate

This section provides brief descriptions of possible MX800 Series terminal device connections and the power pack connection. For complete information about installing and using an optional device, see the user documentation supplied with that device.

WARNING

Ensure that the multiport cable is not connected to a power pack before attaching the multiport cable to the MX800 Series terminal.

MX800 SERIES INSTALLATION GUIDE

15

Contents

Page Page MX800 Series Installation Guide Part Number 23752, Revision C Page CONTENTS Features Installation Maintenance VeriFone Service and Support Specifications PREFACE Intended Audience Document Organization Conventions Used in This Document Table 1 Document Conventions Convention Meaning Features Modular Design Display Features Features and Benefits MX830 Stylus Table 3 Features and Benefits Features Speakers Optional Modules Applications Total Cost of Ownership Installation Unpacking To unpack the shipping carton Cable Tie-down Strap and Screw Multiport Cable Power Pack Selecting a Location Stand Mount PIN Protection Measures Figure 2 Aligning MX800 Series Terminal with the Typical Mounting Plate Installing Countertop Wedge Installing I/O Modules Installing MSAM Cards Figure 8 Removing Installed MSAM Card Figure 9 Inserting the MSAM Card Installing the Trimplate Multiport Cable Connecting ECR in Tailgate Mode Connecting to a Host PC Connecting to the Ethernet LAN Connecting to USB Host or Hub Power Up with the Multiport Cable Figure 15 Power Pack Connection Calibrate Touch Screen Maintenance Page Troubleshooting Display is Blank Serial Port Does Not Work Transaction Fails to Process No Response From the Stylus Gap in Captured Signature No Response From the Touch Screen Page VeriFone Service and Support Page Specifications Page INDEX