ListeningTroubletoShootingUSBMP3SanitizingSongs — continuedWand

2.Press the Selector Control Dial to open the folder and display the MP3 files.

3.Use the Selector Control Dial to highlight an MP3 file.

4.Press the Selector Control Dial to choose the file.

The display returns to the Time/Date display. The MP3 file begins to play and the file’s title is shown at the bottom of the display.

To pause while listening to USB audio, press the Selector Control Dial. PAUSED will be shown on the display. To resume play, press the Selector Control Dial again.

Note: If the USB is removed during play, the display will indicate “device not found” and then go to the time display.

Listening to SD MP3 Songs

The SD/MMC Card Reader is used to listen to MP3 files on Flash Memory Secure Digital (SD) Cards, also known as Multi-Media Cards (MMC). An SD card with pre- recorded selections is included with your Rise & Shine®.

SD Card memory capacity varies. Your Rise & Shine can play audio on all standard SD Cards, up to 2 gigabyte (GB) capacity. There are also limits of not more than 800 MP3 files and not more than 100 directories (or “folders”) per SD Card.

Note: Only MP3 files can be played and only directories containing MP3 files will be displayed.

Inserting an SD Card

Insert an SD Card into the SD/MMC Card Reader slot on the front panel. Insert the card with the label up and the exposed pins facing down. As you push in the card, you’ll notice a slight springy resistance. Push a bit more until you feel the card stop. When you release your finger, the card will engage and spring back very slightly to be almost flush with the front panel.

Removing an SD Card

To remove an SD Card, push it in with your finger and release. The card will spring out slightly, and you can easily remove it.

24

Page 24
Image 24
Verilux VA04 manual Listening to SD MP3 Songs, Inserting an SD Card, Removing an SD Card