Verilux VA04 manual Setting Wake Cycle, Setting the Wake Time

TroubleSettingShootingand UsingSanitizingWAKE SETWand

Setting WAKE Cycle

You can set separate weekend and weekday wake-up programs and customize them to start either 5, 10 or 15 minutes before your desired wake-up time. You may need to experiment with the 5, 15 or 30 minute intervals to determine which cycle works best for you.

Example:

Wake Time: 6:30 am

Wake Options: Audio (FM) and Light

Duration = 15 minutes

WAKE: On

WAKE is shown in the bottom left of the display.

The Wake Cycle will begin at 6:15 am (because of 15-minute “Duration” time delay). The FM radio and light will start at a very low level and will gradually increase to maximum at 6:30 am.

Setting the WAKE Time

1. Press the MENU button.

2.The Main Menu is displayed.

3.Rotate the Selector Control Dial to highlight WAKE SET.

4.Press the Selector Control Dial to choose WAKE SET. The WAKE SETTINGS menu is displayed. The TIME: item is highlighted.

5.Press the Selector Control Dial to choose WAKE TIME. The WAKE TIME sub-menu is displayed. WEEKDAY is highlighted. The current WAKE TIME settings for weekday and weekend are shown in the right column. The current time setting is shown at the bottom of the menu. As in all sub-menus, a PREVIOUS item allows you to return to the previous menu.

6.Press the Selector Control Dial. The hour and AM (or PM) are highlighted.

MAIN MENU

TIME SET

WAKE SET

SLEEP SET

AUDIO SET

LIGHT SET: LAMP ONLY

DISPLAY SET: MEDIUM EXIT

WAKE SETTINGS

TIME: 06:00AM/08:00AM

DURATION: 5 MINUTES

LIGHT: NONE

VOLUME: 25

SOUND: SD

PLAY MODE: CONTINUOUS PREVIOUS

IME: 06:00AM/08:00AM

WAKE TIME DURATION: 5 MINUTES

V WEEKDAY 6:00AM

IGHT: NONE WEEKEND 8:00AM

OLUME: 25

PREVIOUS

OUND: SD 7:42PM

LAY MODE: CONTINUOUS REVIOUS

7.Use the Selector Control Dial to choose both the alarm hour and AM or PM. Notice that the display changes from AM to PM as you pass from 11 to 12 or 12 to 11 (as you turn the control right or left).

8.Press the Selector Control Dial to set the alarm hour. Minutes are highlighted.

9.Use the Selector Control Dial to choose the alarm minutes.

10.Press the Selector Control Dial to set the alarm minutes. The Alarm Time is set and the menu returns to WEEKDAY.

14