Vermont Casting 2823, 820, 2828, 2825, 2827, 2822 operation manual Install the Log Set, Aged Logs

Vermont Castings Jefferson Direct Vent/Natural Vent Gas Heater

ST357

Fig. 33 Install draft hood adpater.

Install the Log Set

1.Remove the logs from their packaging, and inspect each piece for damage. DO NOT INSTALL DAM-

AGED LOGS.

2.Install the rear log 1 by centering it side to side on the sheet metal shelf at the back of the firebox. (Fig. 34)

3.Install the left 2 and right 3 middle logs by engaging holes on their bottoms with pins on the burner brackets. (Fig. 34)

4.Loosely sprinkle the lava rocks directly on top of the burner between the decorative grate and the middle logs. Do not place any ember material behind the middle logs. (Fig. 35)

5.Engage the upper log 4 with the rear log and the right middle log as shown in Figure 35. Engage the

top log 5 with the upper log and the left middle log. (Fig. 35)

	1
2	3
	Decorative Grate
	ST223

Fig. 34 Install the back, left and right logs.

5

4

Lava Rock ST224

Fig. 35 Install lava rock and upper logs.

ST225

Fig. 36 Completed log installation.

20 20002191