BEFORE YOU BEGIN

Precautions

¦This apparatus is capable of two-way communication on channels used for critical aviation safety commu- nications. Therefore, it is important that this radio be kept away from children or other unauthorized users at all times.

¦When making DC connections via the (optional) E- DC-5BDC cable, be absolutely certain to observe the proper voltage level and polarity guidelines. Do not connect this radio directly to any 24 ~ 28 Volt DC source, nor to AC power of any kind. Connecting the VXA-700directly to a source which exceeds 15.0 Volts DC will result in damage to the unit.

¦Do not dispose of the LI-ion Battery Pack in a fire. Do not carry a LI-ion Battery Pack in your pocket, where keys or coins could short the terminals. This could create a serious fire/burn danger, and possibly cause damage to the LI-ion pack.

How to Install the Quick Draw Belt Clip

rConnect the hanger to the rear of the VXA-700, with the notch pointing directly up, using the supplied screw (Figure 1). Use only the screw included with the clip to mount the clip to the back of the VXA-700!

rClip the Quick-Draw Belt Clip onto your belt (Figure 2).

rTo install the VXA-700into the Quick-Draw Belt Clip, align the hanger with the Quick-Draw Belt Clip, and slide the VXA-700into its slot until a click is heard (Figure 3).

rTo remove the VXA-700from the Quick-Draw Belt Clip, rotate the VXA-700180 degrees, then slide the VXA-700out from the Quick-Draw Belt Clip (Figure 4).

Figure 1

Figure 2

Figure 3

Figure 4

8

VXA-700 SPIRIT OPERATING MANUAL