![](/images/backgrounds/238686/238686-6853x1.png)
MENU (“SET”) MODE
1.DISPLAY
1. Scan LampFunction: Enables/Disables the Scan lamp while paused during scanning.
Available Values: On/Off
Default Setting: On
2. BacklightFunction: Selects the Display illumination Mode.
Available Values: Key/Off/On
Default Setting: Key
Key: Illuminates the Display Lamp for 5 seconds when any front panel key is pressed.
Off: Disables the Display lamp.
On: Illuminates the Display lamp continuously.
3. Large FontFunction: Selects the frequency display between the “Large Character” and “Small Character” modes. Available Values: Off/On
Default Setting: Off
4. ContrastFunction: Setting of the display contrast.
Available Values: 00 - 15
Default Setting: 06
Function: Setting of the display brightness level.
Available Values: LV 1 - LV 4
Default Setting: LV 3
6. Meter SymbolFunction: Selects the S- & TX PO meter symbol.
Available Values: Four patterns
,
,
,
Default Setting:
7. Display ModeFunction: Selects the display of the sensor units’ informa- tion.
Available Values: Off/Temp/Volt
Default Setting: Off
Off: Disables the sensor information.
Temp: Indicates the current temperature inside the transceiver’s case.
Volt: Indicates the battery voltage and battery type.
51