•LCD (Liquid Crystal Display)
The display shows the current operating conditions, including frequency, etc.
‚PWR (Power) Switch
Press and hold this switch for 3 seconds to toggle the transceiver’s power on and off.
ƒKeypad
Several keys have triple functions.
The primary functions are labeled on the key top (ac- tivated by simply pressing the key momentarily). The secondary functions are labeled in yellow above the top edge of the key (activated by pressing the 
key first, then the indicated key).
The third functions are labeled in black above the top edge of the key (activated by press and holding the indicated key for 2 seconds).
These functions are described in detail on the page 6.
„BUSY/TX Indicator Lamp
This lamp glows green when a signal is being received and red when transmitting.
You may customize the color setup via the Menu mode.
…Loudspeaker
The internal speaker is located in this position.
†Microphone
Speak across this opening in a normal voice level while pressing the PTT switch, to transmit.
‡Battery Pack Latch
Open this latch for battery removal.
•
‚
†
…
„
ƒ
‡
4