MENU (“SET”) MODE

11. SPECT Width

Function: Selects the visible bandwidth of the Spectrum Analyzer.

Available Values: ±30ch/±15ch

Default Setting: ±30ch

4.TRANSMIT

1. RPT Shift

Function: Set the Repeater Shift Direction.

Available Values: Simplex/–RPT/+RPT

Default Setting: Simplex

Note: This Menu Item is only selectable while operating on the Amateur Band.

2. Shift Width

Function: Sets the magnitude of the Repeater Shift.

Available Values: 00kHz – 9.95MHz (50kHz/step).

Default Setting: 600kHz

Note: This Menu Item is only selectable while operating on the Amateur Band.

3. ARS

Function: Enables/disables the Automatic Repeater Shift function.

Available Values: On/Off

Default Setting: On

4. ARTS

Function: Enables/disables ARTS operation.

Available Values: Off/RX/TX/TRX

Default Setting: Off

Off: Disables the ARTS feature.

RX: Use this mode if you only want your radio to listen, and not poll the other station (in which case their radio should be set to the “TX” mode). Here, your radio will beep and display “In Service” or “Out Service” to indicate the state of connection.

TX: Likewise, this puts your radio into a transmit-only“beacon” mode where you won’t hear the polling beeps (but you can still hear when the other station talks). When activated, you have no display of whether the other station is in range, or not (“In Service” and “Out Service” do not appear).

TRX: Activates the ARTS feature with both operating modes.

5. ARTS Itvl

Function: Selects the polling interval during ARTS op- eration.

Available Values: 15secs/25secs

Default Setting: 25secs

VXA-700 SPIRIT OPERATING MANUAL

55