MENU (“SET”) MODE

3. Power On Beep

Function: Selects the Power-on beep.

Available Values: Off/Mode 1/Mode 2/Mode 3

Default Setting: Mode 1

4. ARTS Beep

Function: Selects the beep option during ARTS opera- tion.

Available Values: On/Off

Default Setting: On

3.RECEIVE

1. SQL

Function: Sets the Squelch threshold level for the AM and FM Narrow modes.

Available Values: 0 - 8

Default Setting: 2

2. WSQL

Function: Sets the Squelch threshold level for the Wide FM mode.

Available Values: 0 - 8

Default Setting: 1

3. Resume

Function: Selects the Scan Resume mode.

Available Values: 5secs/Busy

Default Setting: 5secs

5secs: The scanner will hold for 5 seconds, then resume whether or not the other station is still transmitting.

Busy: The scanner will hold until the signal disappears, then will resume when the carrier drops.

4. DW/PRI

Function: Selects the Dual Watch/Priority Function.

Available Values: DW/PRI

Default Setting: DW

5. RX Save

Function: Selects the Receive-mode Battery Saver “sleep” ratio.

Available Values: ABS/1:1/1:2/1:3/1:4/1:5/Off

Default Setting: ABS

The setting of “1:5” will promote the greatest conservation of battery capacity, but the receiver’s response time to incoming calls will be slowed somewhat.

ABS: Automatic Battery Saver, based on activity on the receiver.

Note: This feature cannot be activated during Scan or Dual Watch/Priority operation.

VXA-700 SPIRIT OPERATING MANUAL

53