If you assign the Spectrum Scope Monitor feature to the 
key (see page 44), you may view operating activity on channels above and below the current operating channel in the VFO mode.
The display indicates the relative signal strength on channels immediately adjacent to the current operating fre- quency.
rSet the radio to the VFO mode by pressing the 
key, if necessary.
rPress (or press and hold
in) the 
key to activate the Spectrum Scope Monitor.
rOnce the Spectrum Scope Monitor is activated, press
the 
key to change the visible bandwidth between ±15 channel and ±30 channel (default: ±30 channels).
The visible bandwidth, however, depends on the se- lected channel step size, so match the channel step to those typically used in your area.
rTo turn the Spectrum Scope Monitor off and operate on the centered (and displayed) channel, simply press PTT switch.
Note: Audio output will be interrupted during Spectrum Analyzer operation. This is normal.
26