ADVANCED OPERATION (AMATEUR RADIO BAND)
Manual Repeater Shift Activation
If the ARS feature has been disabled, or if you need to set a repeater shift direction other than that established by the ARS, you may set the direction of the repeater shift manu- ally.
To do this:
rPress the 
key, then press the 
key to activate the Menu (“SET”) mode.
rRotate the DIAL selector knob to select Menu Item
“4. Transmit,” then press the 
key.
rRotate the DIAL selector knob to select Sub Menu
Item “1. RPT Shift,” then press the 
key.
rPress the 
key again to enable adjustment of this Menu Item.
rRotate the DIAL selector knob to select the desired shift among
rWhen you have made your selection, press the 
key to save the new setting, then press the PTT key repetitively until the radio exits to normal operation.
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change the default repeater shift so as to ensure compatibility with local operating requirements.
To do this, follow the procedure below:
rPress the 
key, then press the 
key to activate the Menu (“SET”) mode.
rRotate the DIAL selector knob to select Menu Item
“4. Transmit,” then press the 
key.
rRotate the DIAL selector knob to select Sub Menu
Item “2. Shift Width,” then press the 
key.
rPress the 
key again to enable adjustment of this Menu Item.
rRotate the DIAL selector knob to select the new re- peater shift magnitude.
rWhen you have made your selection, press the 
key to save the new setting, then press the PTT key
repetitively until the radio exits to normal operation.
Note: If you just have one “odd” split that you need to program, don’t change the “default” repeater shifts using this Menu Item!
36