MEMORY OPERATION

rSelect succeeding characters in the same manner,

pressing the key momentarily after each selec- tion.

rAfter entering the entire name (eight characters maxi-

mum), press the key for 2 seconds to save all data for the channel and exit.

Recalling the Memories

rPress the key, repeatedly if necessary, until “MR” (Memory Recall) appears on the display. In the MR mode, you will see the previously-selected channel number appearing at the bottom of the “MR” icon on the LCD.

rRotate the DIAL selector knob to select the desired memory channel.

rYou may change the readout structure of the Memory display between “Frequency Indication” and “Fre- quency Indication plus Alpha-numeric Label” by pressing Ò key.

rTo exit the Memory mode, press the key three times to return to the VFO mode.

Note: In either the Memory mode or the “Book” Memory mode, you can change memory channels in 10-channel

steps: press the key momentarily, then rotate the DIAL selector knob. The “ ” icon will show at the right edge of the display when the 10-channel-step tuning mode is

active. Press the key once more to resume normal channel selection in one-channel steps.

VXA-700 SPIRIT OPERATING MANUAL

21