ViewSonic VS11856 user manual Connection ports Remote Control, Power, Menu, Color Temp

Connection ports Remote Control

(1)	(2)	(3)	(4)	(5)	(6)	(7)
						(1)
(8) (9)					(10)	(11)

1.	RS-232 terminal
	When operating the projector via a computer, connect this to the controlling computer’s RS-232C port.
2.	USB terminal (Service purpose)
	This connector is for firmware upgrade.
3.	HDMI-1 terminal	(2)
	Interface for digital video.
4.	HDMI-2 terminal
	Interface for digital video.	(3)
5.	RGB IN terminal	(4)
	Connects PC input signal (analog) to this jack.
6.	COMPONENT VIDEO 1 terminals	(5)
	Analog/digital video interface transmits via three separate signals - Y, Cb/Pb, Cr/Pr.
7.	S-VIDEO terminal
	Connects S-Video output from video equipment to this jack.

8.DC 5V terminal

9.DC 12V TRIGGER terminal

10. COMPONENT VIDEO 2 terminals

Analog/digital video interface transmits via three separate signals - Y, Cb/Pb, Cr/Pr. 11. COMPOSITE VIDEO terminal

Connects composite video output from video equipment to this jack.

Introduction

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

(15)

(16)

1. POWER
Power On: Discrete power on key.
Power Off: Discrete power off key.	ENG

2.MENU

Opens and Exits the on-screen menu.

3.COLOR TEMP

Selections of color shading. Browse through factory defaults and user color temp.