| If you need to use protected authentication credential, check |
| ‘Use protected authentication credential’ box, and click |
| ‘Import’ to load .pac credential file; to remove a loaded |
| credential file, click ‘Remove’. |
Session | You can enable or disable session resumption here. If you |
Resumption | don’t know if you should enable session resumption or not, |
| please ask your 802.1x authentication administrator. |
ID \ Password | Input 802.1x username (ID) and password and other |
tab | information if it is required here. Click ‘Show Password’ to |
| show the password you typed. |
Client | Use this tab to select a local certificate from dropdown |
Certification | menu. If the access point you wish to connect required a |
tab | specific client certificate, the certificate must be installed on |
| your computer, and you can select the certificate here. |
Server | Use this tab to use |
Certification | a CA (Certificate Authority) from dropdown menu. If |
tab | intermediate certificates are allowed, please select ‘Allow |
| intermediate certificates’. Also, if you need to specify CA |
| server’s name, you can specify it in ‘Server name’ field. You |
| can select ‘Server name must match’, so the CA server’s |
| name must be the same with the value you set in ‘Server |
| name’ field; If only the domain name part of full server name |
| must the same with the value you set in ‘Server name’ field, |
| select ‘Domain name must end in specified name’. |
After you complete all information related to the access point, click ‘OK’ to save the profile, or click ‘cancel’ to cancel adding a new profile.
If the profile is created, you will see the information in the Profile List.
ViewSonic | 22 |
