| 2: SPAIN |
| 3: FRANCE |
| 4: MKK |
| 5: MKKI (TELEC) |
| 6: ISERAL (Channel 3 to 9) |
| 7: ISERAL (Channel 5 to 13) |
| Please note that only change the country code if you |
| are in different country. For example: when |
| operating this product in US, only channels 1~11 can |
| be operated. Selection of other channels is not |
| permitted under FCC regulations. |
No forwarding | Check this box and wireless clients will not be able to |
among wireless | share data with each other. |
clients |
|
Hide SSID | Check this box and the SSID will not be broadcasted to |
| the public. Your wireless clients must know the exact |
| SSID to be able to connect to your computer. This option |
| is useful to enhance security level. |
Allow BW 40 MHz | Check this box to allow BW 40MHz capability. |
Beacon(ms) | You can define the time interval that a beacon signal |
| should be send. Default value is 100. Do not modify this |
| value unless you know what will be affected. |
TX Power | You can select the wireless output power here. Please |
| select a proper output power setting according to your |
| actual needs. You may not need 100% of output power if |
| other wireless clients are not far from you. |
Idle Time | Select the idle time for the wireless access point. Default |
| value is 300. Do not modify this value unless you know |
| what will be affected. |
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all values to factory default value.
ViewSonic | 40 |