3.Start PBC pairing procedure at access point side (please refer to the instruction given by your access point’s manufacturer), then click ‘PBC’ button in wireless configuration utility to start to establish wireless connection by WPS. Please be patient (This may take a period to complete). When you see ‘WPS status is connected successfully’ message, means the connection between this wireless network card and access point is successfully established by WPS, and the information about access point you connected to will be displayed.
4.You can click ‘Detail’ button to see detailed information of connected access point. If you wish to save this connection as a profile, you can click ‘Export Profile’ button, and this connection will be saved. You can find this connection in ‘Profile’ tab in a later time.
5.Sometime WPS may fail because no
6.When an access point is connected, you can click ‘Disconnect’ to disconnect your wireless network card from a connected access point, or select another
7.If you want to delete a found access point from the list, select it and click ‘Delete’ button.
ViewSonic | 32 |
