| 3. You have to input correct security key to connect | |
|
| an access point with encryption. Please |
|
| contact the owner of access point to ask for |
|
| correct security key. |
| 4. The access point you wish to connect only | |
|
| allows network cards with specific MAC |
|
| address to establish connection. Please go to |
|
| ‘About’ tab and write the value of ‘Phy_Addess’ |
|
| down, then present this value to the owner of |
|
| access point so he / she can add the MAC |
|
| address of your network card to his / her |
|
| access point’s list. |
The network is slow / | 1. | Move closer to the place where access point is |
having problem when |
| located. |
transferring large files | 2. | Disable ‘Tx Burst’ in ‘Advanced’ tab. |
| 3. | Enable ‘WMM’ in ‘WMM’ tab if you need to use |
|
| multimedia / telephony related applications. |
| 4. | Disable ‘WMM – Power Save Enable’ in ‘WMM’ |
|
| tab. |
| 5. | There could be too much people using the |
|
| same radio channel. Ask the owner of the |
|
| access point to change the channel number. |
| Please try one or more solutions listed above. | |
ViewSonic | 51 |
