In ‘WMM Setup Status’ block, current WMM settings will be displayed. And here are descriptions of every setup item:
Item Name | Description |
WMM Enable | Check this box to enable WMM function. Please click |
| ‘Apply’ button on the right of this check box after you |
| check or uncheck this box, so corresponding settings in |
| this window will be activated or deactivated respectively. |
WMM - Power | Check this box to enable WMM power saving mode to |
Save Enable | save energy, and let your computer’s battery live longer. |
| You also have to select WMM power save modes here: |
| AC_BE: Best Performance |
| AC_BK: Worst Performance |
| AC_VI: Video data has priority |
| AC_VO: Voice data has priority |
Direct Link Setup | If you have another |
Enable | can enter its MAC address here, then click ‘Apply’ |
| button, and this network card will establish a direct link to |
| the wireless device you specified here. |
| You also have to specify the timeout value of this |
| |
| 65535 (seconds), and input ‘0’ for infinity. |
| If you want to remove a specific wireless device from |
| direct link table, select the device and click this button to |
| remove it. |
ViewSonic | 29 |
