Visioneer 8600 manual Installing to a USB Port, Installing the Paperport Software

INSTALLING TO A USB PORT 5

Part 1: Installing

INSTALLING TO A USB PORT

This section of the guide contains instructions for connecting your OneTouch scanner to a USB port. Please see “Installing to a Parallel Port” on page 10 to connect the scanner to a parallel port.

STEP 1: INSTALLING THE PAPERPORT SOFTWARE

Note: You must install the PaperPort software before connecting the scanner to the computer. Otherwise the correct software to run your scanner will not be installed and it may not scan properly.

The PaperPort CD includes all the necessary installation files, as well as PaperPort software files and other software files.

The CD also includes the PaperP ort User ’s Guide. You can read the guide from the CD, or print a copy directly from the CD.

To install the PaperPort software:

1.Start Microsoft Windows 98 and make sure that no other applications are running.

Microsoft Windows 98 is required to connect the scanner to a USB port.

2.Insert the PaperPort CD into your computer’s CD-ROM drive. The CD automatically starts.

Note: If the PaperPort CD does not automatically start, make sure the CD drive’s door is completely shut. If the CD still doesn’t start, the Autorun option on your computer is turned off. Click the Windows icon named My Computer. The window shows the drives available on your computer. Double-click the icon for your CD-ROM drive to see the list of files on the CD. Double-click the file named START32.EXE. The CD starts.