SETTING UP PAPERPORT TO WORK WITH YOUR SCANNER 97
SETTING UP PAPERPORT TO WORK WITH YOUR SCANNER
When you selected a scanning option from the Scanner drop-down list, either TWAIN: Visioneer Strobe XP 450 or WIA: Visioneer Strobe XP 450 (Windows XP only), the Scan button at the bottom of the panel should become active. If it doesn’t, you need to set up PaperPort to work with your scanner.
If this Scan button is not active, you need to set up PaperPort to work with your scanner.
Note: Setting up PaperPort is a one-time-only process for each option from the Scanner drop-down list. Therefore, you may have to set up PaperPort once each for TWAIN: Visioneer Strobe XP 450 and WIA: Strobe XP 450. The setup process, described below, is the same for each option. You will not have to set up PaperPort again for an option unless you uninstall the scanner and PaperPort software, then re-install them.
