Visioneer manual Visioneer Strobe XP 450 Scanner USER’S Guide

12VISIONEER STROBE XP 450 SCANNER USER’S GUIDE

■TWAIN only—The TWAIN driver is installed without the OneTouch 4.0 software or the ISIS driver. You can use the Visioneer TWAIN driver to scan from TWAIN applications. You will not be able to use the Scan button on the scanner.

■ISIS only—The ISIS driver is installed. You can use applications that use the ISIS driver, such as QuickScan. You will not be able to use the Scan button on the scanner. You will not be able to use the Visioneer TWAIN driver.

Note: If you decide to change the scanner’s installed drivers later on, you must first uninstall the drivers the scanner is currently using. See the instructions on page 120.

18.Click Next.

During installation you will see this window asking you to select an image for your Color Space setting.

The Color Space setting sets the gamma value for the scanner so scanned items look good on your monitor. Gamma controls the brightness of the midtones of colors. That setting can be changed later on as you’re scanning.